<iframe src="//www.googletagmanager.com/ns.html?id=GTM-PVXQ5Z" height="0" width="0" style="display:none;visibility:hidden"></iframe>
Keeping your world up and running.®
© 2024 Fluke Corporation
Specifications subject to change without notice.

You can depend on Fluke tools to keep your world up and running.

Fluke® tools perform like champions in the most challenging utility-scale food-and-beverage  environments. You can depend on Fluke tools to keep your world up and running.

Precision Multifunction Calibrator

Fluke 726

Precision Multifunction Calibrator

If you need an all-in-one tester that combines the functionality of a digital multimeter with the features of a pressure calibrator, along with some additional functionalities for food and beverage applications including RTD measurements, the Fluke 726 Precision Multifunction Calibrator is the tool for you. The Fluke 726 measures and sources almost all process parameters to not only calibrate transmitters, but also test sensors and valves, and stores all measurement data for analysis later on.

  • Precision multifunction, temp, frequency, voltage, and mA calibrator

  • Calibrates thermocouples and RTD temperature instruments

  • Stores up to eight calibration results in memory for analysis

  • Built-in 24 V Loop Power Supply

Measurement Accuracy
Voltage DC
30.000 V: 0.01% + 2 mV (upper display)
20.000 V: 0.01% + 2 mV (lower display)
90.00 mV: 0.01% + 10 μV
-10.00 mV to 75.00 mV: 0.025% + 1 count (via TC connector)
Current DC
24.000 mA: 0.01%+ 2 mA
Resistance
0.0 to 4000.0 Ω: ± 0.015%
Frequency
2.0 to 1000.0 CPM: 0.05% + 0.1 cpm
1.0 to 1000.0 Hz: 0.05% + 0.1 Hz
1.00 to 15.00 kHz: 0.05% + 0.01 kHz
Sensitivity: 1 V peak-to-peak-minimum
Pressure
Accuracy from 0.025% of range using any of 29 pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure.
Specifications
Ramp functions
Source functions: Voltage, current, resistance, frequency, temperature
Ramps: Slow ramp, Fast ramp, 25% step-ramp
Loop power function
Voltage: 24 V; Accuracy: 10%; Maximum current: 22 mA, short circuit protected
Step functions
Source functions:Voltage, current, resistance, frequency, temperature
Steps: 25% of range, 100% of range
Environmental Specifications
Operating temperature
-10°C to +55°C
Storage temperature
-20°C to +71°C
Operating altitude
3000 m
Safety Specifications
Agency approvals
EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992
Mechanical and General Specifications
Size
200 x 96 x 47 mm
Weight
650 g
Batteries
4 AA alkaline batteries
Battery replacement
Separate battery compartment, accessible without breaking calibration seal
Side port connections
Pressure module connector, also used for remote real-time programming
Precision Multifunction Calibrator

Roles



Applications

How would you like to purchase?

Talk to a Fluke Specialist

Thank you for contacting us, we will be in touch with you shortly.

Unfortunately there was an issue submitting your request. Please Try again.

Your privacy is important to us

Follow us